Description

When it comes to monitoring the pressure of a fuel tank, a pressure gauge is an indispensable tool. However, to ensure accurate measurements, it's important to install the gauge correctly. In this article, we'll discuss the key considerations when installing a pressure gauge on a fuel tank.

1. Location

The pressure gauge should be installed on the side of the fuel tank, as this is where the pressure is highest. Installing the gauge in any other location could result in inaccurate readings and potentially dangerous situations.

2. Maximum Working Pressure

Before installing a pressure gauge, it's important to determine the maximum working pressure of the fuel tank. This will dictate the range of the pressure gauge that should be selected. Ideally, the range of the pressure gauge should be slightly wider than the maximum working pressure to ensure accurate readings.

3. Pressure Gauge Selection

When selecting a pressure gauge, it's important to choose one with a range that matches the maximum working pressure of the fuel tank. The gauge should also be of high quality and able to withstand the harsh conditions inside the tank.

4. Gasket Use

To prevent leakage in the tank, it's important to use gaskets when installing the pressure gauge. The gaskets should be made of a material that is compatible with the fuel and capable of withstanding the pressure and temperature changes inside the tank.

In conclusion, installing a pressure gauge on a fuel tank requires careful consideration and attention to detail. By following these key considerations, you can ensure accurate pressure readings and minimize the risk of dangerous situations.

Indication Range:	0~3,000psi
Case Nominal Diameter:	1-1/2" ; 2", 2- 1/2"; 3"; 4"; 6"
Case Material:	Stainless Steel
Windows:	Polycarbonate
Movement:	Brass, Stainless Steel
Connection:	Bottom Connection or Center Back Male Connection
Inlet Thread:	1/2"; 1/4"; 1/8"; 3/8" BSP, BSPT, NPT or According to customers requirements.
Filled Oil:	Glycerine, Silicone Oil
Scales:	psi, bar, mpa, kg/cm3, Hg single or dual scale or According to customers requirements.